Question: Can you plug a turntable into aux?

This turntable has a built-in phono preamp. Simply plug the turntables audio signal cable into one of the receivers analog audio inputs. These inputs are oftentimes labeled Aux (auxiliary), Line In, Analog In, etc. You can even use your receivers CD or Tape input, if needed.

Can you connect a turntable to aux?

Connect the RCA cables from your turntable to the aux input on your receiver. Locate the preamp on the rear of your receiver and be sure the switch is selected to “Line”. Select Aux on your receiver and begin playing your turntable to enjoy music.

Is phono the same as aux?

A turntable produces a PHONO output signal. This phono signal needs to be converted to a LINE LEVEL signal (sometimes referred to as AUX signal) to work with audio equipment including stereo systems, computers, and speakers. A phono preamp converts PHONO to LINE LEVEL.

Can you plug a turntable into CD input?

Simply plug the turntables audio signal cable into one of the receivers analog audio inputs. These inputs are oftentimes labeled Aux (auxiliary), Line In, Analog In, etc. You can even use your receivers CD or Tape input, if needed. No other connections are required.

Do you need a phono input for a record player?

If your turntable has a built-in preamp (LINE-level output) you must connect it to one of these LINE-level inputs. And not the PHONO input on your receiver. But if your turntable doesnt have a built-in preamp (PHONO-level output only) you must connect it to the PHONO input on the receiver.

Do I need an amp for a turntable?

Yes. A turntable must be connected to an amplifier as the output signal is not strong enough to drive speakers. So if you have a turntable with a built-in preamp and also have speakers with a built-in amplifier, then you connect the two without the standalone amplifier.

Do you need to buy speakers for a turntable?

Turntables need an external amplifier and speakers to play records. They usually offer much higher sound quality than record players with the speakers built-in. But turntables wont be as compact, cute, and affordable as record players.

Can I connect a Bluetooth turntable to a soundbar?

Bluetooth vinyl player The Bluetooth player can connect to most soundbars wirelessly. No cables are required. Since many soundbars do not have an analog input, using Bluetooth may be the best way to connect your turntable to the soundbar.

Can you put a turntable on top of an amplifier?

Most stereo receivers have the transformer on the left side, so putting the turntable on the right side of the receiver is recommended. We strongly recommend not placing your turntable on top of your receiver - this can cause buzz issues and may also prevent your receiver from getting proper air flow.

Whats the point of a record player?

1. Unique Sound Quality. Playing music on a record player adds a distinctive quality that no other device can match. The record player brings music to life and makes it feel almost tangible that you cannot help but get lost in the tunes that fill the air around you.

Will cheap turntables ruin records?

The short answer is, yes they can. Some cheaper turntables feature a low-quality stylus that might last only 40 playing hours and can start damaging your records.

Write us

Find us at the office

Yee- Lancione street no. 98, 92681 Abu Dhabi, United Arab Emirates

Give us a ring

Hawkins Parolisi
+18 246 478 424
Mon - Fri, 10:00-19:00

Say hello